The air handler is located in the indoor unit, while the compressor and condenser are located in the outdoor unit of a split-system air conditioner. As a rule, a set of lines will exist between these two quantities. In most cases, these lines will consist of copper refrigerant tubing, an electrical cord, and a condensate drain. Unlike packaged units, which have all of their parts housed in a single cabinet, split systems keep all of their parts in their cabinets. They’re also not like window units, which are mounted on the wall or in a window and have a fan, compressor, and coils inside a box. The two are not interchangeable in any way.
These are some of the reasons why split-system air conditioners are so common:
An Easier Technique For Setting Up
Due to their modular design, split systems facilitate installation more than traditional systems. There is no need for ductwork, but the gap between your indoor and outdoor units must be at least 3 inches wide for the connector. This is the smallest allowable aperture size. After that, all that’s left to do is locate a place to plug in your units and get power hooked up. Since refrigerant tubes come in varying lengths, the distance between your indoor and outdoor units can be as much as 100 feet.
Advancements In Energy Conservation’s Efficacy
Inefficient ductwork can waste as much as 30 percent of the cooling energy in a building’s central systems. Problems with energy efficiency may arise if the ductwork in question is not insulated or was built in an area without climate control. The ductless design of Split System Air Conditioners increases the likelihood of cost and energy savings, as well as the potential for reduced utility bills in the future. A ductless air conditioner’s efficiency rating of 30 SEER or higher is more than double that of a conventional air conditioner.
You Can Easily Incorporate Them Into Your Decor
In terms of where you may put it in your home, a split-system air conditioner is flexible. You can hang them from the ceiling or mount them on the wall. In addition, many of them provide jackets that are as fashionable as they are refined and gorgeous. Compared to window units, which necessitate making a hole in the wall or devoting a window to the air conditioner, split systems take up less visual space. It is easier to miss a split system.
Covert Procedures
When compared to a window air conditioner, a ductless indoor unit can operate at a significantly lower noise level (as low as 19 dB). Since the ductless condenser is so much more compact, it may be easily installed in a wide variety of spaces despite potential noise restrictions or spatial constraints.
Improved Sense Of Security
If you want to keep your home safe from intruders, install a split system air conditioner instead of a window unit. While the hole you’ll need for your conduit isn’t very dangerous on its own, leaving a window or wall unsecured could make it easier for a burglar to gain entry.
Zoning
When you install a split-system air conditioner in your home, you can cool each room individually by dividing the space into zones. Unlike traditional air conditioning systems, which use a single thermostat for the entire building, this new system will have individual thermostats for each zone. You may control which areas of your home are cooled by installing multiple thermostats at strategic locations. As a result, you’ll be able to reduce your energy consumption and save money.
Ductless air conditioners are convenient in several different situations, including houses undergoing renovations in which ducting is not possible, older houses with inadequate distribution, houses heated with electricity, and houses heated with hydroponics.
